CYS-E-CSML Light Weight Chopped Strand Matfor Hand Lay-up

CYS-E-CSML Light Weight Chopped Strand Mat is made from E-glass low size chopped strands around 50mm in length, bonded together by powder or emulsion binder which makes it perfectly suitable for use with polyester resins. It is suitable for application by hand lay-up ,mold process, to make FRP sheets and panels, vehicles, boat hulls, cooling towers, etc.

Product Features

High smoothness of the laminate surface

Good compatibility with vinylester, epoxy resins.

Good drapability

Highly suitable for good surface appearance

Highly suitable for first layer with gel coat

Type of Glass	E
Unit weight(g/m2)	100~225
Width(cm)	20~320
Binder	Powder, Emulsion

 

 

 

Technical Parameters

Unit weight	Width	Moisture content	LOI
<10%	±5mm	≤0.2%	2~4%

 

Packaging

Chopped Strand Mat is wound onto a paper tube which has an inside diameter of 80mm. The roll outside diameter is approximately 275mm. Each roll is wrapped up in plastic film and then packed in a carton. The rolls are stacked horizontally or vertically onto pallets. All pallets are stretch wrapped and strapped to maintain stability during transport.

Package height(mm)	Width+50
Package inside diameter (mm)	80
Package outside diameter(mm)	275
Package weight(kg)	20.8

 

 

 

Palletlength (mm)	1140	1400
Pallet width (mm)	1140	1140
Pallet height (mm)	Width+50	Width+50

 

 

Storage

Chopped strand mat should be stored in its original packaging in a dry, cool and water-proof place. The recommended conditions are at temperatures from 15 to 35°C and humidity between 35 and 65%. To ensure safety and avoid damage to the product, the pallets should not be stacked more than three layers high, when the pallets are stacked in 2 or 3 layer, care should be taken to correctly and smoothly move the top pallet.

We have a specialised line of 3.2m width, specialised producing E glass 100g mat, the high quality and stable. Please contact us for detail!